• About Mechanical Steering System
• Selecting the 'Correct Steering System'
• Mechanical Steering System
  • Thread Connect Steering System
  • Easy Connect Steering System
  • Lite-55 Steering System
• Packaged Rotary Steering kits
  • Packaged Steering System : Thread Connect
  • Packaged Steering System : Easy Connect
  • Packaged Steering System : Lite 55
• Replacement & Cross Reference with Teleflex®/Utraflex®/Morse®
• How to Measure for New Steering Cable
• How to Measure for Replacement Steering Cable
• Maintenance of Steering System
• Steering Accessories
• Ordering Code, Photograph and Packaging Details
  • Steering Helm
  • Steering Cable
  • Bezel kit & Link Arm

Maintenance Of Steering System

Maintenance of the Mechanical Steering Systems is a critical aspect since it affects the life of the system and also the safety of the user.

The Steering Helm is a pre assembled unit and should not be opened or reassembled. Any tampering with the unit will render possibility of damage and failure of the system. The Helm should be installed as per the manufacturer's instructions.

The Steering Cable should be installed providing minimum bends in the routing. In case of tight routings use slightly longer cables to avoid tight bends.Incorrect routing shall increase the back lash in the system and also make it less efficient.

The Steering Cable is exposed to marine corrosion. Therefore all the exposed metal parts of the cable should be cleaned and greased at regular intervals.

The Steering Cable should be inspected regularly to check any damage to the Cable Conduit or damaged/failed parts. In case of any of the above the cable should be replaced. The cables are pre assembled and therefore any attempt to repair the cable shall render it unsafe of use.

When the boat is not to be used for a long period of time, the Steering Cable should be removed from the engine and all its exposed parts be cleaned and greased. The cable should be checked for any damage before reinstalling it.